ORABIND - FD45
Binder For Pigment Printing
| Composition | Co-polymer of Butyl Acrylate and Styrene |
| Nature | Non-ionic |
| pH Value | 7.0 to 8.5 |
| Stability | Stable for a long time |
| Solubility | Easily soluble in Hot & Cold water |
| Fastness | Good rubbing, washing fastness and dry-cleaning fastness |
properties
- APEO Free
- Environmental Friendly, Biodegradable
- Low Formaldehyde Content
- Meets all standards of ECO-TEX 100 and REACH
- Shows good adhesiveness, brightness, permanency, softness, transparency, and economical
It is an excellent binder to give soft and pliable fixation in pigment printing. It can be safely used as backfilling agent for woolen and synthetic carpets. In order to achieve permanent and semi-permanent finishes, this could be used along with various resins. This binder imparts excellent fastness to cracking and gives a flexible film that confers excellent handle properties to the fabrics. It is, therefore, recommended for use with synthetic thickeners as well as normal emulsion systems. Pastes prepared with the binder have good stability, fluidity, and spreading properties. The required percentage varies in each case; however, suggest 5-10% by wt. of the total paste.
Material Saftey Data Sheet
Customer is required to read this Material Safety Data Sheet carefully to become aware of the hazards associated with the product if any. You are also requested to furnish a copy of this information to your employee, customer, agent, contractor, etc., in the interest of safety.
| Product Name | ORABIND - FD45 |
| Hazard Classification | Not a hazardous substance within the meaning of the current Dangerous Substances Regulation |
| Fire and Explosion Hazard Data |
Flash Point: Not Applicable (Aqueous System) Flammable Limits: Not Applicable (Aqueous System) Extinguishing Media: The material will not burn until water has evaporated. For residual solids, use water spray, carbon dioxide, dry chemical, or universal-type foam fire extinguishers. Special Fire Fighting Procedure: None Explosion Hazard: None |
| Health Hazard Data |
Swallowing: No harmful effects expected. Physician should be contacted in case of overdose. Skin Contact: May cause reddening of the skin, wash with soap & water. Inhalation: No emergency care anticipated. Eye Contact: Wash eyes with water for at least 15 minutes. |
| Reactivity Data |
Stability: Stable Condition to Avoid: None Hazardous Polymerization: Will Not occur. |
| Spill or Leak Procedure | Major spills should be collected for disposal according to local government regulations. Minor spills may be flushed to sewer if local regulations permit. |
| Special Protection Information |
Respiratory Protection: Not Required Ventilation: General room ventilation is satisfactory. Protective Gloves: Recommended. Eye Protection: Safety Glasses. |
| Labeling & Other Precautions | ORABIND - FD45 is not a hazardous industrial substance and thus does not require a hazard warning label. The normal precautions relating to handling chemicals apply. Thus the place of work must be well-ventilated, skin care measures must be adopted, and safety goggles must be worn. Local industrial hygiene regulations must be observed. |